Staplex^®High Volume Air Samplers

COUNTRY OF ORIGIN: Made in U.S.A.

Staplex^® Model TFIA-2 High Volume Air Sampler (220-230 volts) with 4" (10.16 cm) diameter Filter Holder and flowmeter              

Staplex^® Model TFIA-2F High Volume Air Sampler with Built-in Flow Adjuster (220-230 volts) with 4" (10.16 cm) diameter Filter Holder and flowmeter     

Staplex^® Model TFIA-2CDT High Volume Air Sampler (220-230 volts) with built-in Electronic Countdown Timer with LCD, with 4" (10.16 cm) diameter, Filter Holder and flowmeter 

Staplex^® Model TFIA-2FCDT High Volume Air Sampler (220-230 volts) with built-in Flow Adjuster and Electronic Countdown Timer with LCD with 4" (10.16 cm) diameter, Filter Holder and flowmeter  

Part No. T6790-3TA Carbon Brush Assembly (2/set) for Model TFIA-2  “T” series 

Part No. T14A2 Motor, 220-230 volts for Model TFIA-2  “T” series 

Part No. T17 Flowmeter for TFIA-2 series High Volume Air Sampler 

Staplex^® Model TFIA-4 (24 volts DC) with 4" (10.16 cm) diameter Filter Holder and flowmeter  
TF24B Battery Pack for TFIA-4 High Volume Air Sampler (20 minutes run time on full charge)  
TF24CC Carry Case for TF24B Battery Pack 
TF24CU2 Battery Charger, 220-230-230 volts, for TF24B Battery Pack  
Staplex^® Model TFIA-4BC (24 volts DC) with battery cable, with 4" (10.16 cm) diameter, Filter Holder and flowmeter                                               

Please note: TB24B Battery pack is designed to for use with Model TFIA-4.  Model TFIA-4BC with Battery Cables is designed for use with 2 each 12 volt automobile batteries.
Staplex^® FR-2 Flow Recorder, 220-230 VAC (includes pen and 60 charts) US$1,375.00 each (should be used with SH810 8"x10" Filter Holder Assembly)
Part No. FR-106 Charts for FR-1 Flow Recorder 
Part No. FR-700-0120 Pen for FR-1 Flow Recorder

FILTERS AND ACCESSORIES:
Staplex^® Type TFA41 Filter Paper 4" diameter (100/box) 

Staplex^® Type TFAGF41 Glass Fiber Filters 4" dia. (100/box) 

Staplex^® Type TFA810 Filter Paper 8"x10" (100/box) 

Staplex^® Type TFAGF810 Glass Fiber Filters 8"x10" (100/box) 

Staplex^® Type TFA2133 Filters, 4" diameter (100/box)

Staplex® Type TFAQ102 Quartz Filter, 4" (10.16 cm) diam. (100/box) 

Staplex® Type TFAQ810 Quartz Filter, 8" x 10" (25/box) 

Staplex® Type TFAQ810NUM Quartz Filter, 8" x 10" (100/box) consecutively numbered 

Staplex® Type TFAC41 Carbon Impregnated Filter Paper, 4" (10.16 cm) diam. (100/box) 

Staplex® Type TFAC810 Carbon Impregnated Filter Paper, 8"x10" (100/box) 

FILTER HOLDERS:
Staplex® No. SH810 8"x10" Filter Holder Assembly  

Staplex No. SH4 Filter Holder Assembly 4" (10.16 cm) diameter 

TRIPOD:

Staplex^®  TR-1 Tripod Mounting  

OUTDOOR SHELTER:

Staplex^® SAM Aluminum Outdoor Shelter (requires SH810 8"x10" Filter Holder)
T29VMC Vertical Mounting Kit to Mount T17 Flow Meter to Shelter (includes bracket, hardware, tubing & tie wrap)

Note: we will include this at no charge if you buy TFIA-2 Series Air Sampler for use in SAM Shelter.  TFIA-2 Series Air Sampler will be supplied without 4" diameter filter holder assembly and with 2 brass exhaust ports - one of which would be used with the flowmeter included with the TFIA-2 Series Air Sampler.

CONSTANT FLOW CONTRLLERS:

For Automatic Constant Flow Controllers – (must be used with SH810 Filter Holder Assembly)

Staplex^® FC-2 Constant Flow Controller, 220-230 VAC 

or

Staplex^® FC-2LTM  Constant Flow Controller with Elapsed Time Indicator, 220-230 VAC 

or

Staplex^® FC-2MLT Constant Flow Controller with 7-day Mechanical Timer and Elapsed Time Indicator, 220-230 VAC 

CALIBRATORS:
Staplex CKHV Calibration Kit (use with 4" Filter Holder) 
Staplex CKHV810 Calibration Kit (use with 4" and 8"x10" Filter Holders) 
AD810  8"x10" Calibration Adapter (use with CKHV to make it CKHV810)  
A126  Fluorescein Green Concentrate  

FLOW ADJUSTER/BRUSH SEATER:

Staplex^®  FA-2 Flow Adjuster/Brush Seater (220-230 volts) 

TIMERS:

Staplex^®  DTM-2 7-Day Programmable Digital Timer (220-230 volts)  

Staplex® MT-2 7 Day Mechanical Timer (220-230 volts) 

(NOTE: If ordered with a system that included a FC-2 Series Constant Flow Controller, MT-2 Mechanical Timer would be built into FC-2LTM and supplied as FC-2MLT with Constant Flow Controller, Elapsed Time Indicator and 7-Day Mechanical Timer)

Staplex® ETM-2 Elapsed Time Indicator (220-230 volts) 
Staplex® DTM-4CDT Count Down (Turn on/Turn Off) Timer with settable thumbwheels and LCD readout (220-230 Volts) 

CARRY CASES:

Staplex^® TFIA-CC Carrying Case for TFIA, TFIA-2 and TFIA-4 High Volume Air Samplers 

Staplex^®  TF-CCK Carrying Case (for convenient storage and carrying of TFIA, SH810, TR-1, Filters) 

Staplex^® High Volume Total Suspended Particulate (TSP) Air Sampling System System (in accordance to US EPA ambient air samping procedures) as follows:
Staplex Model TSP-2 Total Suspended Particulate Air Sampling System, 220-230 volts, configured with
        TFIA-2 High Volume Air Sampler with 0-2 cmm flowmeter for mounting to shelter,

        SH810 8"x10" Filter Holder Assembly,

        SAM Aluminum Outdoor Shelter

To this basic system, you can add any of the following accessories:

For Manual Flow Adjustment -

Specify Model TFIA-2F with built-in Flow Adjuster (instead of Model TFIA-2)  or add Model FA-2 Flow Adjuster 

For Automatic Constant Flow Feature – add

Staplex^® FC-2 Constant Flow Controller, 220-230 VAC 

or

Staplex^® FC-2LTM  Constant Flow Controller with Elapsed Time Indicator, 220-230 VAC 

or

Staplex^® FC-2MLT Constant Flow Controller with 7-day Mechanical Timer and Elapsed Time Indicator, 220-230 VAC 

Timers

Staplex^® DTM-2 Programmable 7-Day Digital Timer (220-230 volts) 

or

Staplex^® MT-2   Mechanical 7 Day Timer (220-230 volts)  (NOTE: If ordered with a system that included a FC-2 Series Constant Flow Controller,

MT-2 Mechanical Timer would be built into FC-2LTM and supplied as FC-2MLT with Constant Flow Controller, Elapsed Time Indicator and 7-Day Mechanical Timer)

ETM-2 Elapsed Time Indicator (220-230 volts)

Staplex^® FR-2 Flow Recorder, 220-230 VAC (includes pen and 60 charts)  (should be used with SH810 8"x10" Filter Holder Assembly)
Part No. FR-106 Charts for FR-1 Flow Recorder (60/pack) 
Part No. FR-700-0120 Pen for FR-1 Flow Recorder  

******

Staplex Model PM10-2   PM10 High Volume Air Sampler System, 220 VAC, configured with
        TFIA-2 High Volume Air Sampler,

        PM10-SSI PM10 Size Selective Inlet,

        SH810 8"x10" Filter Holder Assembly,

        FPC810 Filter Paper Cartridge, 

        FC-2LTM Constant Flow Controller with Elapsed Time Indicator,

        SAM Aluminum Outdoor Shelter (without gabled roof)   

Staplex PM10-SSI PM10 Size Selective Inlet   

Staplex PM2.5-SSI PM.2.5 Size Selective Inlet  (remove PM10-SSI Inlet from PM10-2 Systems and replace with this to sample for PM2.5)

To adapt Staplex PM10 High Volume Air Sampler System for use as PM2.5 Air Sampling System, add the following:
Staplex PM2.5CON Conversion Kit (converts PM10 System to PM2.5 [use as PM10 without kit; PM2.5 with Kit, but not simultaneously)

Staplex Model PM-2.5-2   PM2.5 High Volume Air Sampler 220-230 VAC,  configured with
        TFIA-2 High Volume Air Sampler,

        PM2.5-SSI Size Selective Inlet,

        SH810 8"x10" Filter Holder Assembly,

        FPC810 Filter Paper Cartridge, 

        FC-2LTM Constant Flow Controller with Elapsed Time Indicator,

        SAM Aluminum Outdoor Shelter (without gabled roof)      

Staplex FPC-810 Filter Paper Cartridge for use with PM10 inlet 

To these systems, you can add any of the following accessories:
DTM-2 Digital Timer (220-230 volts) 

MT-2 7 Day Mechanical Timer (220-230 volts)

ETM-2 Elapsed Time Indicator (220-230 volts) 
FR-2 Flow Recorder, 220-230 VAC (includes pen and 60 charts) 

Filters for PM10 and PM2.5 sampling:

Staplex Type TFAQ810 Quartz Filters, 8"x10" (25 per box)